73310169429 |
DNMX-331-UEXL-DPC15HT |
55° Diamond |
3/8 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
10 |
$24.19 |
|
73310169430 |
DNMX-331-UEXL-DPC25UT |
55° Diamond |
3/8 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
23 |
$23.28 |
|
73310169431 |
DNMX-331-UEXL-DPC35RT |
55° Diamond |
3/8 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$23.28 |
|
73310169432 |
DNMX-331-UEXR-DPC15HT |
55° Diamond |
3/8 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
|
$24.19 |
|
73310169433 |
DNMX-331-UEXR-DPC25UT |
55° Diamond |
3/8 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
20 |
$23.28 |
|
73310169434 |
DNMX-331-UEXR-DPC35RT |
55° Diamond |
3/8 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$23.28 |
|
73310169435 |
DNMX-332-UEXL-DPC15HT |
55° Diamond |
3/8 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
10 |
$24.19 |
|
73310169436 |
DNMX-332-UEXL-DPC25UT |
55° Diamond |
3/8 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
28 |
$23.28 |
|
73310169437 |
DNMX-332-UEXL-DPC35RT |
55° Diamond |
3/8 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$23.28 |
|
73310169438 |
DNMX-332-UEXR-DPC15HT |
55° Diamond |
3/8 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
|
$24.19 |
|
73310169439 |
DNMX-332-UEXR-DPC25UT |
55° Diamond |
3/8 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
37 |
$23.28 |
|
73310169440 |
DNMX-332-UEXR-DPC35RT |
55° Diamond |
3/8 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
30 |
$23.28 |
|
73310169441 |
DNMX-431-UEXL-DPC25UT |
55° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
20 |
$27.56 |
|
73310169444 |
DNMX-431-UEXR-DPC25UT |
55° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
10 |
$27.56 |
|
73310169447 |
DNMX-432-UEXL-DPC25UT |
55° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
16 |
$27.56 |
|
73310169450 |
DNMX-432-UEXR-DPC25UT |
55° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
5 |
$27.56 |
|
73310169453 |
DNMX-441-UEXL-DPC15HT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
|
$31.36 |
|
73310169454 |
DNMX-441-UEXL-DPC25UT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
19 |
$30.15 |
|
73310169455 |
DNMX-441-UEXL-DPC35RT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
100 |
$30.15 |
|
73310169456 |
DNMX-441-UEXL-DMC30UT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
|
$30.15 |
|
73310169457 |
DNMX-441-UEXR-DPC15HT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
|
$31.36 |
|
73310169458 |
DNMX-441-UEXR-DPC25UT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
5 |
$30.15 |
|
73310169459 |
DNMX-441-UEXR-DPC35RT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
85 |
$30.15 |
|
73310169460 |
DNMX-441-UEXR-DMC30UT |
55° Diamond |
1/2 inches |
1/4 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
|
$30.15 |
|
73310169461 |
DNMX-442-UEXL-DPC15HT |
55° Diamond |
1/2 inches |
1/4 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
|
$31.36 |
|