73310169411 |
CNMX-431-UEXL-DPC25UT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
30 |
$20.61 |
|
73310169412 |
CNMX-431-UEXL-DPC35RT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
16 |
$20.61 |
|
73310169413 |
CNMX-431-UEXL-DMC30UT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
50 |
$20.61 |
|
73310169414 |
CNMX-431-UEXR-DPC25UT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
30 |
$20.61 |
|
73310169415 |
CNMX-431-UEXR-DPC35RT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
20 |
$20.61 |
|
73310169416 |
CNMX-431-UEXR-DMC30UT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
50 |
$20.61 |
|
73310169417 |
CNMX-432-UEXL-DPC25UT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
23 |
$20.61 |
|
73310169418 |
CNMX-432-UEXL-DPC35RT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
13 |
$20.61 |
|
73310169419 |
CNMX-432-UEXL-DMC30UT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Special Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
14 |
$20.61 |
|
73310169420 |
CNMX-432-UEXR-DPC25UT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
15 |
$20.61 |
|
73310169421 |
CNMX-432-UEXR-DPC35RT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
22 |
$20.61 |
|
73310169422 |
CNMX-432-UEXR-DMC30UT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Right |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Special Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
31 |
$20.61 |
|
73310169826 |
CNMG-431-UEM-DPC15HT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
6 |
$13.46 |
|
73310169828 |
CNMG-431-UEM-DPC25UT |
80° Diamond |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
40 |
$12.95 |
|
73310169832 |
CNMG-432-UEM-DPC15HT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
25 |
$13.46 |
|
73310169833 |
CNMG-432-UEM-DPC25UT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
21 |
$12.95 |
|
73310169834 |
CNMG-432-UEM-DPC35RT |
80° Diamond |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
41 |
$12.95 |
|
73310170676 |
CCGT-21.51-UEXL-DPC25UT |
80° Diamond |
1/4 inches |
3/32 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Low Pressure, Turning and Boring Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
20 |
$21.70 |
|
73310170677 |
CCGT-21.51-UEXL-DPC35RT |
80° Diamond |
1/4 inches |
3/32 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Low Pressure, Turning and Boring Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$21.70 |
|
73310170678 |
CCGT-21.51-UEXL-DMC30UT |
80° Diamond |
1/4 inches |
3/32 inches |
.015 inches |
Left |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Low Pressure, Turning and Boring Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
40 |
$21.70 |
|
73310170679 |
CCGT-21.51-UEXR-DPC25UT |
80° Diamond |
1/4 inches |
3/32 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Low Pressure, Turning and Boring Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
10 |
$21.70 |
|
73310170680 |
CCGT-21.51-UEXR-DPC35RT |
80° Diamond |
1/4 inches |
3/32 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Low Pressure, Turning and Boring Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$18.25 |
|
73310170681 |
CCGT-21.51-UEXR-DMC30UT |
80° Diamond |
1/4 inches |
3/32 inches |
.015 inches |
Right |
High Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and UEXR Chipbreaker, for Low Pressure, Turning and Boring Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
25 |
$21.70 |
|
73310170682 |
CCGT-21.52-UEXL-DPC25UT |
80° Diamond |
1/4 inches |
3/32 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Low Pressure, Turning and Boring Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
5 |
$21.70 |
|
73310170683 |
CCGT-21.52-UEXL-DPC35RT |
80° Diamond |
1/4 inches |
3/32 inches |
.031 inches |
Left |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEXL Chipbreaker, for Low Pressure, Turning and Boring Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
5 |
$21.70 |
|