73310169861 |
WNMG-331-UEM-DPC15HT |
80° Trigon |
3/8 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
6 |
$12.62 |
|
73310169862 |
WNMG-331-UEM-DPC25UT |
80° Trigon |
3/8 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$12.13 |
|
73310169863 |
WNMG-331-UEM-DPC35RT |
80° Trigon |
3/8 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
10 |
$12.13 |
|
73310169864 |
WNMG-332-UEM-DPC15HT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
43 |
$12.62 |
|
73310169865 |
WNMG-332-UEM-DPC25UT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
20 |
$12.13 |
|
73310169866 |
WNMG-332-UEM-DPC35RT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
25 |
$10.20 |
|
73310169867 |
WNMG-431-UEM-DPC15HT |
80° Trigon |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
20 |
$14.33 |
|
73310169868 |
WNMG-431-UEM-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
6 |
$13.79 |
|
73310169869 |
WNMG-431-UEM-DPC35RT |
80° Trigon |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$13.79 |
|
73310169870 |
WNMG-432-UEM-DPC15HT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
14 |
$14.33 |
|
73310169871 |
WNMG-432-UEM-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
28 |
$13.79 |
|
73310169872 |
WNMG-432-UEM-DPC35RT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
15 |
$13.79 |
|
73310169873 |
WNMG-433-UEM-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
High Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and UEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
96 |
$13.79 |
|
73310180140 |
WCGT-32.50.5-NFU-DNU10GT |
80° Trigon |
3/8 inches |
5/32 inches |
.008 inches |
Neutral |
High Positive Rake Angle |
DNU10GT, Uncoated Grade |
Grade DNU10GT with Uncoated Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Non-Ferrous Material. |
110 |
$18.25 |
|
73310180141 |
WCGT-32.50.5-NFU-DNX10UT |
80° Trigon |
3/8 inches |
5/32 inches |
.008 inches |
Neutral |
High Positive Rake Angle |
PVD Microplus® Plasma-TiAlN coating. For turning Low Silicone Aluminum and Aerospace Aluminum, High Temp Super Alloys, all non Ferrous Materials |
Grade DNX10UT with PVD Multi Layer Coating Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Hardened Steel Material. |
|
$28.48 |
|
73310180144 |
WCGT-32.51-NFU-DNU10GT |
80° Trigon |
3/8 inches |
5/32 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
DNU10GT, Uncoated Grade |
Grade DNU10GT with Uncoated Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Non-Ferrous Material. |
|
$22.80 |
|
73310180145 |
WCGT-32.51-NFU-DNX10UT |
80° Trigon |
3/8 inches |
5/32 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
PVD Microplus® Plasma-TiAlN coating. For turning Low Silicone Aluminum and Aerospace Aluminum, High Temp Super Alloys, all non Ferrous Materials |
Grade DNX10UT with PVD Multi Layer Coating Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Hardened Steel Material. |
10 |
$28.48 |
|
73310180148 |
WCGT-32.52-NFU-DNU10GT |
80° Trigon |
3/8 inches |
5/32 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
DNU10GT, Uncoated Grade |
Grade DNU10GT with Uncoated Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Non-Ferrous Material. |
12 |
$22.80 |
|
73310180149 |
WCGT-32.52-NFU-DNX10UT |
80° Trigon |
3/8 inches |
5/32 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
PVD Microplus® Plasma-TiAlN coating. For turning Low Silicone Aluminum and Aerospace Aluminum, High Temp Super Alloys, all non Ferrous Materials |
Grade DNX10UT with PVD Multi Layer Coating Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Hardened Steel Material. |
18 |
$28.48 |
|
73310180152 |
WCGT-431-NFU-DNU10GT |
80° Trigon |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
DNU10GT, Uncoated Grade |
Grade DNU10GT with Uncoated Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Non-Ferrous Material. |
|
$20.84 |
|
73310180153 |
WCGT-431-NFU-DNX10UT |
80° Trigon |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
High Positive Rake Angle |
PVD Microplus® Plasma-TiAlN coating. For turning Low Silicone Aluminum and Aerospace Aluminum, High Temp Super Alloys, all non Ferrous Materials |
Grade DNX10UT with PVD Multi Layer Coating Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Hardened Steel Material. |
|
$33.97 |
|
73310180156 |
WCGT-432-NFU-DNU10GT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
DNU10GT, Uncoated Grade |
Grade DNU10GT with Uncoated Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Non-Ferrous Material. |
10 |
$26.04 |
|
73310180157 |
WCGT-432-NFU-DNX10UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
High Positive Rake Angle |
PVD Microplus® Plasma-TiAlN coating. For turning Low Silicone Aluminum and Aerospace Aluminum, High Temp Super Alloys, all non Ferrous Materials |
Grade DNX10UT with PVD Multi Layer Coating Finish and NFU Chipbreaker, for Universal Cuts in Aluminum, Stainless Steel, Hardened Steel Material. |
5 |
$33.97 |
|