73310169342 |
WNMG-332-PEM-DPC15HT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
41 |
$12.13 |
|
73310169343 |
WNMG-332-PEM-DPC25UT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
51 |
$12.13 |
|
73310169344 |
WNMG-332-PEM-DPC35RT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
|
$12.13 |
|
73310169345 |
WNMG-432-PEM-DPC15HT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
35 |
$14.33 |
|
73310169346 |
WNMG-432-PEM-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
75 |
$13.79 |
|
73310169347 |
WNMG-432-PEM-DPC35RT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
33 |
$13.79 |
|
73310169348 |
WNMG-433-PEM-DPC15HT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
83 |
$14.33 |
|
73310169349 |
WNMG-433-PEM-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
15 |
$13.79 |
|
73310169350 |
WNMG-433-PEM-DPC35RT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and PEM Chipbreaker, for Medium Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
19 |
$13.79 |
|
73310169402 |
WNMG-432-PER-DPC15HT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and PER Chipbreaker, for Roughing Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
75 |
$14.33 |
|
73310169403 |
WNMG-432-PER-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and PER Chipbreaker, for Roughing Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
15 |
$13.79 |
|
73310169404 |
WNMG-432-PER-DPC35RT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and PER Chipbreaker, for Roughing Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
65 |
$13.79 |
|
73310169405 |
WNMG-433-PER-DPC15HT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DPC15HT with CVD Multi Layer Coating Finish and PER Chipbreaker, for Roughing Cuts in Carbon & Alloy Steel, Stainless Steel, Cast Iron Material. |
1 |
$14.33 |
|
73310169406 |
WNMG-433-PER-DPC25UT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC25UT with CVD Multi Layer Coating Finish and PER Chipbreaker, for Roughing Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
76 |
$13.79 |
|
73310169407 |
WNMG-433-PER-DPC35RT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Low speed turning of Carbon and Alloy Steel, Stainless Steel |
Grade DPC35RT with CVD Multi Layer Coating Finish and PER Chipbreaker, for Roughing Cuts in Carbon & Alloy Steel, Stainless Steel Material. |
535 |
$13.79 |
|
73310169929 |
WNMG-432-KER-DKC10UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbo-nitrede Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DKC10UT with CVD Multi Layer Coating Finish and KER Chipbreaker, for Roughing Cuts in Cast Iron, Hardened Steel, Non-Ferrous Material. |
16 |
$13.79 |
|
73310169930 |
WNMG-432-KER-DKC15RT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbo-nitrede Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DKC15RT with CVD Multi Layer Coating Finish and KER Chipbreaker, for Roughing Cuts in Cast Iron, Hardened Steel, Non-Ferrous Material. |
35 |
$13.79 |
|
73310169931 |
WNMG-433-KER-DKC15RT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD, Multi Layer of Alumina, Titanium Carbo-nitrede Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron |
Grade DKC15RT with CVD Multi Layer Coating Finish and KER Chipbreaker, for Roughing Cuts in Cast Iron, Hardened Steel, Non-Ferrous Material. |
22 |
$13.79 |
|
73310169989 |
WNMG-331-MEF-DMC30UT |
80° Trigon |
3/8 inches |
3/16 inches |
.015 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEF Chipbreaker, for Finishing Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
3 |
$12.13 |
|
73310169990 |
WNMG-431-MEF-DMC30UT |
80° Trigon |
1/2 inches |
3/16 inches |
.015 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEF Chipbreaker, for Finishing Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
18 |
$13.79 |
|
73310169991 |
WNMG-432-MEF-DMC30UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEF Chipbreaker, for Finishing Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
7 |
$13.79 |
|
73310169992 |
WNMG-332-MEM-DMC30UT |
80° Trigon |
3/8 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEM Chipbreaker, for Medium Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
21 |
$12.13 |
|
73310169993 |
WNMG-432-MEM-DMC30UT |
80° Trigon |
1/2 inches |
3/16 inches |
.031 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEM Chipbreaker, for Medium Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
15 |
$13.79 |
|
73310169994 |
WNMG-433-MEM-DMC30UT |
80° Trigon |
1/2 inches |
3/16 inches |
.046 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEM Chipbreaker, for Medium Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
10 |
$13.79 |
|
73310169995 |
WNMG-434-MEM-DMC30UT |
80° Trigon |
1/2 inches |
3/16 inches |
.062 inches |
Neutral |
Positive Rake Angle |
CVD TiCN/TiN , Multi Layer of Titanium Carbonitride and Titanium Nitride Coating , Main grade for turning of austenitic stainless steels at medium to high cutting speeds. |
Grade DMC30UT with CVD Multi Layer Coating Finish and MEM Chipbreaker, for Medium Cuts in Stainless Steel, Austenic, Ferritic, Martensitic Material. |
30 |
$13.79 |
|